Boat Solar Installation: Five 125W Walkable Marine Solar Panels Powering a 48V Battery System
Project Overview
The customer wanted to charge a portable power system similar to an EcoFlow, specifically a Percon 48V battery unit. These types of battery systems are becoming more common because they simplify power management while still providing enough capacity for real-world use on boats and mobile setups.
How the Solar Panels Were Wired
The system uses five 125 Watt Walkable Solar Panels, configured to take full advantage of the battery system’s available inputs.
-
Four panels are wired in parallel and connected to the main charging input.
This configuration provides the appropriate voltage and higher current needed to charge the 48V battery system effectively - The fifth panel is connected separately to a secondary charging port, which is designed to accept lower voltage input.
This type of configuration is a simple way to maximize charging from multiple solar inputs on modern battery systems.
No Charge Controller Needed
One interesting detail in this installation is that no external solar charge controller was used. The panels are connected directly to the battery system because the Percon unit has a built-in solar charging controller.
Even though the system outputs at 48V, it can accept a range of input voltages, which gives flexibility when designing the solar array.
Real-World Use: Simple and Practical
At the end of the day, this system is all about usability.
The solar panels help keep the onboard battery charged, which powers:
- Refrigeration (keeping food and drinks cold)
- Basic onboard electronics
- Everyday convenience systems
It’s a straightforward setup that delivers reliable performance without unnecessary complexity.
Why Walkable Solar Panels Work Well on Boats
This project uses our 125 Watt Walkable Solar Panels, which are specifically designed for marine environments.
They’re a great fit for boats because:
- They can be stepped on without damage
- They handle vibration and harsh conditions
- They install cleanly on flat surfaces
- They keep a low profile
For tight spaces like boat roofs, this combination makes a big difference.
Installation by Chester Point Marina
This installation was completed by Chester Point Marina in Chester, Connecticut, one of our trusted partners.
They’ve handled several solar installs for our customers and consistently do solid work on marine projects.
Thinking About a Similar Setup?
If you're planning a solar system for a boat, van, or off-grid setup, choosing the right panel makes the process much easier.
You can explore our walkable solar panels here:
👉 https://www.custommarineproducts.store/collections/semi-rigid-walk-on-marine-solar-panels